Back to top

Electric chain hoist GP

Electric chain hoist GP

SKU: 
GPM250, GP250 - 1000
  • 2 year warranty
  • Chain safety factor minimum 8-times (1-fall in FEM, 2m, ISO, M5)
  • Protection class IP65 as standard
  • Quiet running with 3-step drive and helical gearing
  • Polygonal connections

Request a quote

Close

Send your quote request

GIS Canada Palan GP / GIS Canada GP Hoist
GIS Canada Palan GP / GIS Canada GP Hoist

Technical
specifications   

Load capacity: maximum 2500 kg (2-falls, FEM 1 Am, ISO M4)
Standard voltages:
     575V/3Ph 60 Hz, 460V/1Ph 60 Hz, 230V/3Ph 60 Hz
     230V/1Ph 60 Hz, 115V/1Ph 60 Hz
115V low voltage control
1 phase motor: 1 speed
3 phase motor: 1 or 2 speeds
Protection class: IP65
Eyebolt suspension
Standard lifting height: 3 m
Minimum 8-fold chain safety factor (1 fall, FEM 2m, ISO M5)
Control cable length: 1.8 m
Ergonomic control switch with emergency-stop
Control switch with external strain relief
Geared limit switches for highest and lowest hook position (3 ph.)
Isolation class F (motor)
DC spring-loaded brake
Slipping clutch adjustable and not in the flow of forces
 

Customer's
benefit

The GP is simple in its structure and does not contain any sensitive electronics, which minimizes the risk of operational interruptions. It is characterised by quiet running and is made for longevity whilst working hard. The ergonomic control switch with 115 V low voltage allows convenient and safe working. Maintenance is easy, quick and needs no special tools.

Profile steel chain
The higher cross-sectional area reduces wear and increases the lifetime of the chain. The GP has a chain safety factor of at least 8-times (FEM, 2m, ISO, M5). The case hardened and manganese phosphated profile steel chain provides about 15% more capacity at an identical nominal diameter compared to the round steel chain.

Polygonal connections
The inner part of the modularly designed chain hoist embodies real innovation. All shaft-hub connections are built to a polygonal design. This allows significantly faster disassembly and assembly during maintenance and thus reduces service costs.

Protection class IP65
A feature of the hoist and the control switch is the protection class IP65. It is dust proof and protected against water jets. As it is compact and robust designed, the GP is best suited for dusty environments as well as for outdoor operation.

Control switch
The control switch fits comfortably in your hand and is ergonomically designed. It is robust, impact-resistant, safe to operate and controlled by 115 V low voltage. Push buttons placed in parallel increase the ease of operation. The external strain relief protects the control cable.

 

Accessories
& options

Direct control, special control
Radio remote control
Frequency inverter
Other operating voltages on request
Other control voltages on request
Other speeds available on request
Single handed operation with controls on the handle
Hook suspension
Geared limit switch with two additional emergency stops
External limit switch / multiple limit switches
Parallel connection of multiple chain hoists
Operating data counter
Press-on and press-off control switch
Temperature monitoring to prevent the motor from overheating
Manual brake release / Second brake
Chain container for various lifting heights
Gear grease for low temperature use / food industry
Tropicalised insulation
Slack chain shutdown
Models Capacity Speed Number
of falls
Chain weight
per metter
Weight unequiped Weight equipped
3m lifting height
(kg) m/min (kg)
GPM250/1N1Ph 125 9.6 1 0.34 14 17
GPM250/1NL1Ph 250 4.8 1 0.34 14 17
GP250/1N1Ph 250 9.6 1 0.34 22 24
GP250/1NL1Ph 250 4.8 1 0.34 22 24
GP250/2N1Ph 500 4.8 2 0.34 22 25
GP250/2NL1Ph 500 2.4 2 0.34 22 25
GP500/1N1Ph 250 9.6 1 0.69 23 26
GP500/1NL1Ph 500 4.8 1 0.69 23 26
GP500/2N1Ph 500 4.8 2 0.69 23 28
GP500/2NL1Ph 1000 2.4 2 0.69 23 28
GP1000/1N1Ph 500 9.6 1 1.37 48 56
GP1000/1NL1Ph 1000 4.8 1 1.37 48 56
GP1000/2N1Ph 1000 4.8 2 1.37 48 60
GP1000/2NL1Ph 2000 2.4 2 1.37 48 60
Models Capacity Speed Number
of falls
Chain weight
per metter
Weight unequiped Weight equipped
3m lifting height
(kg) m/min (kg)
GPM250/1NF 250 9.6/2.4 1 0.34 14 17
GPM250/1SF 125 19.2/4.8 1 0.34 14 17
GP250/1N 250 9.6 1 0.34 22 24
GP250/1NF 250 9.6/2.4 1 0.34 22 24
GP250/1SF 125 19.2/4.8 1 0.34 22 24
GP250/2N 500 4.8 2 0.34 22 25
GP250/2NF 500 4.8/1.2 2 0.34 22 25
GP500/1N 500 9.6 1 0.69 23 26
GP500/1NF 500 9.6/2.4 1 0.69 23 26
GP500/2SF 250 19.2/4.8 1 0.69 23 26
GP500/2N 1000 4.8 2 0.69 23 28
GP500/2NF 1000 4.8/1.2 2 0.69 23 28
GP1000/1N 1000 9.6 1 1.37 49 57
GP1000/1NF 1000 9.6/2.4 1 1.37 50 58
GP1000/1SF 500 19.2/4.8 1 1.37 50 58
GP1000/2N 2000 4.8 2 1.37 49 61
GP1000/2NF 2000 4.8/1.2 2 1.37 50 62

1 fall

2 falls

Models a1 a2* a3* a4 b1 b2* b3 c1 c2
eye
v2
hook
c3
eye*
c3
hook*
h1
eye*
h1
hook*
(mm)
GPM250/1 202 243 122 Ø30 389 120 20 134 39 90 419 470 330 381
GP250/1 246 296 151 Ø40 444 155 24 162 49 124 462 537 406 480
GP250/2 246 296 168 Ø40 444 155 24 162 49 124 462 537 432 506
GP500/1 246 296 151 Ø40 444 155 24 163 49 124 462 537 414 488
GP500/2 246 296 175 Ø40 444 155 24 162 49 124 462 537 453 528
GP1000/1 328 385 198 Ø52 548 180 33 212 58 140 598 680 535 617
GP1000/2 328 385 235 Ø52 548 180 33 212 58 140 598 680 595 676

* Chain bucket for lifting height 3m

Proud to be the only manufacturer of electric chain hoists, trolleys and winches in CanadaMade in Canada